SCR-575
Radio Set SCR-575 was a complete v·h·f, ground, mobile direction finding, and two-way radio communi- cation set for a-m (voice, cw, and icw) operation in the frequency range of 100 to 156 me. It was normally used in v·h-f Fighter Control Net Systems for ground-to-air and point-to-point communication. This radio set operated on four crystal-controlled, preset, push-button selected channels for reception or transmission. In addition to the BC-624 receiver component (part of Radio Set SCR-522-A) there were two Radio Receivers BC-639 which are manually tuned and provided for direction finding as well as for regular communication. One receiver is normally used for stand-by operation. Antenna Equipment RC-153 is a large manually rotatable, azimuth-calibrated equipment used for communication, ond for direction finding by either visual, or aural-null methods. This was mounted on K-53 truck which carried all the equipment necessary for operation of the radio set (except the power unit which is trailer-drawn). Relay Unit BC-687 was used for remote control operation over telephone lines. The power unit normally supplied 4,080 w for all apparatus including heating of the operating com- partment in Truck K-53. For limited emergency operation of the radio equipment only, batteries were available
Components
- K-53 truck
- K-63 trailer PE-99
- BC-639 Rec. X2
- RA-42 rectifier
- BC-638 freq. meter
- BC-624 Rec.
- BC-625 Transmitter
- RC-153 Ant.
- RC-93 test equipment
- PE-94 Dyno
- RM-18 remote
- PN-25 control panel
- BC-687 relay unit
See Also
References
- TO 16-40SCR575-3