Difference between revisions of "MT-1029~VRC"

From RadioNerds
Jump to navigation Jump to search
m (RadioNerds moved page MT-1029/VRC to MT-1029~VRC without leaving a redirect)
 
(2 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
==Configure for "remote" power control from the VIC1==
 
==Configure for "remote" power control from the VIC1==
  
If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1.  In this case you would also power the  [[AM-1780]] via the mount.. This frees up the "C" RX port so you can add another receiver.  
+
If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1.  In this case you would also power the  [[AM-1780~VRC|AM-1780/VRC]] via the mount.. This frees up the "C" RX port so you can add another receiver.  
  
 
;Proper Power Pin inside the MT-1029 for Remote Operation
 
;Proper Power Pin inside the MT-1029 for Remote Operation
 
[[File:VRC Remote Power.png|600px]]
 
[[File:VRC Remote Power.png|600px]]
 +
 +
 +
[[Category:Military/Mounts]]
 +
{{DISPLAYTITLE:MT-1029/VRC}}

Latest revision as of 00:04, 7 November 2013

MT-1029 MOUNT for transceivers RT-246, RT-524/VRC, VRC-53, VRC-64, etc . With a 4 pin plug for the power supply cable.

MT-1029-VRC.png


Configure for "remote" power control from the VIC1

If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1. In this case you would also power the AM-1780/VRC via the mount.. This frees up the "C" RX port so you can add another receiver.

Proper Power Pin inside the MT-1029 for Remote Operation

VRC Remote Power.png