User:BinD

hi and stuff

• vehicle shown is T-4 Armored car. Circa-1933
• Reciever shown is BC-189

• FT / Fittings

• FT-1 Fitting, wooden key battens and sliding shelf. for keys, set box, and battery for SCR-65 in JN jenny
• FT-2 coupler for mast sections
• FT-3 Pin for insulator IN-6
• FT-4 Mounting, generator, 2 wooden blocks and steel screws 6-7/8 X 9-1/2 inches, for curtis JN aeroplane.
• FT-5 Adapter, american vacuume tubes to French equipment
• FT-6 Bracket, mounting, for BC-11, or BC-12
• FT-7 Mounting, generator, aluminum casting for JN-4-D, JN-4-D jenny
• FT-8 Mounting, generator, aluminum casting for JN-4
• FT-9 Fastener, cast iron tent slide for guy rope
• FT-10 fixture portable desk lamp, and clamp, for use in 6-ton tank.
• FT-11 Band, anchor for BC-39 to shelf in 6-ton tank
• FT-12 Clamp, for holding mast in verticle position on 6-ton tank
• FT-13 Holder, for compass I-14, lower end of mast loop LP-1
• FT-14 Clamp, for MS-13
• FT-15 Adapter French vacuume tubes to American equipment
• FT-16 Frame, metal for mounting SCR-84 in airplane
• FT-17 Mounting, for condenser, P/O SCR-73
• FT-18 Mounting, generator, sheet metal, JN-4-H jenny
• FT-19 Mounting, sheet metal frame for mounting grid leak resistance and condenser
• FT-20 Mounting, sheet metal frame for inked cardboard resistor.
• FT-21 turnbuckle, bronze 8-inches
• FT-22 Mounting, for condensers
• FT-23
• FT-24 Clip, for U-bolt, for wire rope.
• FT-25 Pin wooden, for TN-1 tent, P/O SCR-49
• FT-26
• FT-27
• FT-28
• FT-29
• FT-30
• FT-31
• FT-32
• FT-33
• FT-34
• FT-35
• FT-36
• FT-37
• FT-38
• FT-39
• FT-40
• FT-41
• FT-42
• FT-43
• FT-44
• FT-45 sleeving, lead, for covering splice in lead covered cable. (various sizes)
• FT-46 sleeving, lead, for covering splice in lead covered cable.
• FT-47 sleeving, lead, for covering splice in lead covered cable.
• FT-48 sleeving, lead, for covering splice in lead covered cable.
• FT-49 Stud, brass knob threaded for TM-32 terminal.
• FT-50 Clamp, for mounting I-22 to BC-47
• FT-51
• FT-52
• FT-53 Adapter, wood used with FT-54 TN-1 (tent) P/O SCR-49
• FT-54 Adapter, wood used with TN-1 (tent) P/O SCR-49
• FT-55 Adapter, 31 inch spruce, X 2-1/2 Dia. for MS-2, TN-1 (tent) P/O SCR-49
• FT-56
• FT-57 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism
• FT-58 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism ect.
• FT-59 Mounting, buzzer used in target range signaling system
• FT-60 Spreader, antenna, 33-Feet 6-inchs long
• FT-61 Bracket, iron triangle for teleautograph.
• FT-62 Hanger for teleautograph.
• FT-63 Sleeve, splicing iron for armored cable
• FT-64 Mounting, generator, steel SCR-73 to strut of De Haviland plane.
• FT-65 Adapter, for VT-5 tube, SO-2 socket
• FT-66
• FT-67
• FT-68
• FT-69
• FT-70
• FT-71
• FT-72
• FT-73
• FT-74
• FT-75
• FT-76
• FT-77
• FT-78
• FT-79
• FT-80
• FT-81
• FT-82
• FT-83
• FT-84
• FT-85
• FT-86
• FT-87
• FT-88
• FT-89
• FT-90
• FT-91
• FT-92
• FT-93
• FT-94
• FT-95
• FT-96
• FT-97
• FT-98
• FT-99 mounting, P/O SCR-283
• FT-100 mounting, P/O SCR-283
• FT-101
• FT-102
• FT-103
• FT-104
• FT-105
• Ft-106
• FT-107 mount for BD-77 dynamotor
• Ft-108
• FT-109
• FT-110
• FT-111
• FT-112
• FT-113
• FT-114
• FT-115 mounting, BC-375
• FT-116
• FT-117
• FT-118 mounting, P/O SCR-283
• FT-119
• FT-120
• FT-121
• FT-122
• FT-123
• FT-124
• FT-125
• FT-126
• FT-127
• FT-128
• FT-129
• FT-130
• FT-131
• FT-132
• FT-133
• FT-134
• FT-135
• FT-136
• FT-137
• FT-138
• FT-139
• FT-140
• FT-141 mounting, P/O SCR-283
• FT-142 for [[BC-306]
• FT-143
• FT-144
• FT-145
• FT-146
• FT-147
• FT-148
• FT-149
• FT-150
• FT-151 mounting for BC-191, SCR-193
• FT-152
• FT-153
• FT-154 mount for BC-348, AN~ARR-11
• FT-155
• FT-156
• FT-157
• FT-158
• FT-159
• FT-160
• FT-161
• FT-162 mounting for BC-312
• FT-163
• FT-170
• FT-171
• FT-172 snuber for BC-191, SCR-193
• FT-173 mounting for BC-223
• FT-174
• FT-175
• FT-176
• FT-177
• FT-178 snuber for BC-312, SCR-193
• FT-179
• FT-180
• FT-185 mounting for PE-55 dynamotor
• FT-200
• FT-237 mounting for SCR-508, SCR-608
• FT-238
• FT-239 mount for SCR-293, SCR-294
• FT-240 P/O AN~ARC-3
• FT-241 crystal holder
• FT-242
• FT-243
• FT-244 rack for AN~VRC-1
• FT-244-A rack AN~ARC-10
• FT-245
• FT-246
• FT-247
• FT-248
• FT-249
• FT-250 shock mount for SCR-510, SCR-610.
• FT-251
• FT-252
• FT-253 mounting for SCR-506
• FT-254
• FT-284 stand for CH-74, or adapter plate
• FT-285 low stand for CH-74
• FT-295 mount for SCR-585
• FT-300
• FT-317 mounting for plate supply unit PE-217, PE-120
• FT-318 mounting for BC-908
• FT-328 mounting for BC-918
• FT-345 Mount (receiver) BC-603, AN~VRC-5
• FT-400
• FT-422 bracket (brush guard) MP-50
• FT-423
• FT-429 renforcing plate for MP-50 mast bracket
• FT-449 bracket, for LS-3?
• FT-450 bracket legs for FT-250 used in Dodge WC pickup
• FT-482 mounting for SCR-694
• FT-486 P/O RC-36
• FT-488 Mount P/O SCR-624
• FT-499 bracket, legs for FT-250
• FT-500
• FT-506 mounting for SCR-619
• FT-507
• FT-508 Mount (transmitter) AN~VRC-5

Related Files

TM 11-2632

Remote Control Equipment

RC-261

28 Oct. 1944