User:BinD

hi and stuff

• vehicle shown is T-4 Armored car. Circa-1933
• Reciever shown is BC-189

• FT / Fittings

• FT-1 Fitting, wooden key battens and sliding shelf. for keys, set box, and battery for SCR-65 in JN jenny
• FT-2 coupler for mast sections
• FT-3 Pin for insulator IN-6
• FT-4 Mounting, generator, 2 wooden blocks and steel screws 6-7/8 X 9-1/2 inches, for curtis JN aeroplane.
• FT-5 Adapter, american vacuume tubes to French equipment
• FT-6 Bracket, mounting, for BC-11, or BC-12
• FT-7 Mounting, generator, aluminum casting for JN-4-D, JN-4-D jenny
• FT-8 Mounting, generator, aluminum casting for JN-4
• FT-9 Fastener, cast iron tent slide for guy rope
• FT-10 fixture portable desk lamp, and clamp, for use in 6-ton tank.
• FT-11 Band, anchor for BC-39 to shelf in 6-ton tank
• FT-12 Clamp, for holding mast in verticle position on 6-ton tank
• FT-13 Holder, for compass I-14, lower end of mast loop LP-1
• FT-14 Clamp, for MS-13
• FT-15 Adapter French vacuume tubes to American equipment
• FT-16 Frame, metal for mounting SCR-84 in airplane
• FT-17 Mounting, for condenser, P/O SCR-73
• FT-18 Mounting, generator, sheet metal, JN-4-H jenny
• FT-19 Mounting, sheet metal frame for mounting grid leak resistance and condenser
• FT-20 Mounting, sheet metal frame for inked cardboard resistor.
• FT-21 turnbuckle, bronze 8-inches
• FT-22 Mounting, for condensers
• FT-23
• FT-24 Clip, for U-bolt, for wire rope.
• FT-25 Pin wooden, for TN-1 tent, P/O SCR-49
• FT-26
• FT-27
• FT-28
• FT-29
• FT-30
• FT-31
• FT-32
• FT-33
• FT-34
• FT-35
• FT-36
• FT-37
• FT-38
• FT-39
• FT-40
• FT-41
• FT-42
• FT-43
• FT-44
• FT-45 sleeving, lead, for covering splice in lead covered cable. (various sizes)
• FT-46 sleeving, lead, for covering splice in lead covered cable.
• FT-47 sleeving, lead, for covering splice in lead covered cable.
• FT-48 sleeving, lead, for covering splice in lead covered cable.
• FT-49 Stud, brass knob threaded for TM-32 terminal.
• FT-50 Clamp, for mounting I-22 to BC-47
• FT-51
• FT-52
• FT-53 Adapter, wood used with FT-54 TN-1 (tent) P/O SCR-49
• FT-54 Adapter, wood used with TN-1 (tent) P/O SCR-49
• FT-55 Adapter, 31 inch spruce, X 2-1/2 Dia. for MS-2, TN-1 (tent) P/O SCR-49
• FT-56
• FT-57 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism
• FT-58 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism ect.
• FT-59 Mounting, buzzer used in target range signaling system
• FT-60 Spreader, antenna, 33-Feet 6-inchs long
• FT-61 Bracket, iron triangle for teleautograph.
• FT-62 Hanger for teleautograph.
• FT-63 Sleeve, splicing iron for armored cable
• FT-64 Mounting, generator, steel SCR-73 to strut of De Haviland plane.
• FT-65 Adapter, for VT-5 tube, SO-2 socket
• FT-66
• FT-67
• FT-68
• FT-69
• FT-70
• FT-71
• FT-72
• FT-73
• FT-74
• FT-75
• FT-76
• FT-77
• FT-78
• FT-79
• FT-80
• FT-81
• FT-82
• FT-83
• FT-84
• FT-85
• FT-86
• FT-87
• FT-88
• FT-89
• FT-90
• FT-91
• FT-92
• FT-93
• FT-94
• FT-95
• FT-96
• FT-97
• FT-98
• FT-99
• FT-100
• FT-107 mount for BD-77 dynamotor
• FT-151 mounting for BC-191, SCR-193
• FT-162 mounting for BC-312
• FT-172 snuber for BC-191, SCR-193
• FT-178 snuber for BC-312, SCR-193
• FT-250 shock mount for SCR-510, SCR-610.

Related Files

TM 11-2632

Remote Control Equipment

RC-261

28 Oct. 1944