Difference between revisions of "MT-1029~VRC"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
RadioNerds (talk | contribs) |
||
| Line 9: | Line 9: | ||
;Proper Power Pin inside the MT-1029 for Remote Operation | ;Proper Power Pin inside the MT-1029 for Remote Operation | ||
| − | [[File:VRC Remote Power.png | + | [[File:VRC Remote Power.png|600px]] |
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 19:09, 21 October 2011
MT-1029 MOUNT for transceivers RT-246, RT-524/VRC, VRC-53, VRC-64, etc . With a 4 pin plug for the power supply cable.
Configure for "remote" power control from the VIC1
If you have a VIC1 connected to the VRC series radios, it is possible to control the radio power via the VIC1. In this case you would also power the AM-1780 via the mount.. This frees up the "C" RX port so you can add another receiver.
- Proper Power Pin inside the MT-1029 for Remote Operation
