Difference between revisions of "M-222"

From RadioNerds
Jump to navigation Jump to search
 
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[File:M-222 8751780191 l.jpg|400px]]
+
==Overview==
 +
Application
 +
Converter M- 222 is designed to supply emergency power ringing current for telephone switchboards such as Switchboards BD-91-( ) and BD-96, when power from a 110-volt, 60 cycle source is not available or when the standard 110-volt power ringing equipment fails in service. Converter M- 222 is a component of Telephone Central Office Sets TC- 4 and TC-12.
 +
 
 +
==Technical Characteristics==
 +
===Power Source===
 +
Converter M-222 uses two 1 1/2-volt Batteries BA-23, connected in series, as a source of power. Battery life is approximately 8 to 10 hours under continuous operation.
 +
 
 +
===Output Voltage and Frequency===
 +
The output of Converter M-222 is 100 volts alternating current open circuit, or 50 volts with a 5-watt load. The peak voltage will not exceed 250 volts. The frequency of the output voltage is 24 cycles ± 4 cycles.
 +
 
 +
===Description===
 +
Converter M-222 consists essentially of the following assemblies:  Box. Converter M-222 is housed in a rectangular steel box with two removable sides. On the front panel are mounted an output receptacle, a nameplate, the lower section of one catch fastener, and Switch SW- 105. The switch is mounted in a recess in the panel. The ON and OFF positions of the switch are marked on the panel.
 +
 
 +
[[File:M-222_7.png|400px|center]]
 +
 
 +
==Images==
 +
<gallery widths=100px heights=100px perrow=5>
 +
File:M-222 8751780191 l.jpg
 +
File:M-222_1.png
 +
File:M-222_2.png
 +
File:M-222_3.png
 +
File:M-222_4.png
 +
File:M-222_5.png
 +
File:M-222_6.png
 +
</gallery>
 +
 
 +
==Related Files==
 +
;{{pdf|TM-11-344_1943.pdf|TM 11-344 (1943)}}
 +
:Technical Manual
 +
::Converter
 +
::M-222
 +
::March 16, 1943
 +
 
 +
 
 +
;{{pdf|TM-11-344_1946.pdf|TM 11-344 (1946)}}
 +
:Technical Manual
 +
::Converter
 +
::M-222
 +
::April 1946
 +
 
  
 
[[Category:Military/Power Supplies]]
 
[[Category:Military/Power Supplies]]

Latest revision as of 12:50, 20 September 2013

Overview

Application Converter M- 222 is designed to supply emergency power ringing current for telephone switchboards such as Switchboards BD-91-( ) and BD-96, when power from a 110-volt, 60 cycle source is not available or when the standard 110-volt power ringing equipment fails in service. Converter M- 222 is a component of Telephone Central Office Sets TC- 4 and TC-12.

Technical Characteristics

Power Source

Converter M-222 uses two 1 1/2-volt Batteries BA-23, connected in series, as a source of power. Battery life is approximately 8 to 10 hours under continuous operation.

Output Voltage and Frequency

The output of Converter M-222 is 100 volts alternating current open circuit, or 50 volts with a 5-watt load. The peak voltage will not exceed 250 volts. The frequency of the output voltage is 24 cycles ± 4 cycles.

Description

Converter M-222 consists essentially of the following assemblies: Box. Converter M-222 is housed in a rectangular steel box with two removable sides. On the front panel are mounted an output receptacle, a nameplate, the lower section of one catch fastener, and Switch SW- 105. The switch is mounted in a recess in the panel. The ON and OFF positions of the switch are marked on the panel.

M-222 7.png

Images

Related Files

Adobe PDF icon.png TM 11-344 (1943)

Technical Manual
Converter
M-222
March 16, 1943


Adobe PDF icon.png TM 11-344 (1946)

Technical Manual
Converter
M-222
April 1946