Integrating the VIC-1 with other equipment

From RadioNerds

Revision as of 00:49, 21 October 2011 by RadioNerds (talk | contribs) (Created page with "Integrating the VIC 1 with other equipment is quite easy really.. there are some common connections that can be used. ;TX / RX :J501 or J503 must be used, they are 18 pin connec...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Integrating the VIC 1 with other equipment is quite easy really.. there are some common connections that can be used.

TX / RX: J501 or J503 must be used, they are 18 pin connections..

CX-4723 - 18 Pin Cable

RX only: J508 or J510

Jack Functions

J501: "A" Radio connection. Also supplies power to AM-1780 in "OTHER" mode.

J503: "C" radio connection

J504: Commander Control Box, Independent of Crew connections (J505-J507)

J505: Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)

J506: Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)

J507: Crew Intercom Control Box, Paralleled with other crew jacks (J505, J506, J507)

J508: Power connection when in "INT ONLY" mode or C RX radio in "OTHER" mode

J509: C-2299 Retransmission connection

J510: "B" Radio (RX only) connection

J511: C-2299 Retransmission connection

Retrieved from "https://radionerds.com/index.php?title=Integrating_the_VIC-1_with_other_equipment&oldid=344"