Difference between revisions of "Integrating the VIC-1 with other equipment"
Jump to navigation
Jump to search
RadioNerds (talk | contribs) |
RadioNerds (talk | contribs) |
||
| Line 20: | Line 20: | ||
:[[:File:vic1-nokia_style-cellphone.gif|Nokia Style headset Connection to A (J501) or C (J503)]] | :[[:File:vic1-nokia_style-cellphone.gif|Nokia Style headset Connection to A (J501) or C (J503)]] | ||
:[[:File:vic1-kenwood-ht.gif|Kenwood HT Connections to A (J501) or C (J503)]] | :[[:File:vic1-kenwood-ht.gif|Kenwood HT Connections to A (J501) or C (J503)]] | ||
| + | |||
| + | |||
| + | ;Example of My integration | ||
| + | These are some photos of my integration of the VIC1 with civilian radios, i used the circuit defined in [[:File:Vic1-tx-rx-to-civilian radio.gif]] | ||
Revision as of 18:55, 21 October 2011
Integrating the VIC 1 with other equipment is quite easy really.. there are some common connections that can be used.
NOTE: One very important thing to note is that the VIC1 is 24 Volt and most Civilian radios are 12 Volt, you need to isolate them from each other if they are on connected to the system.
SEE AM-1780 for Jack details
- TX / RX
- J501 or J503 must be used, they use the CX-4723 - 18 Pin Cable.
- RX only
- J508 or J510
- Common integration Diagrams
- Proper Isolated Interface for 12volt radios to Intercom with TX and RX
- Civilian Radio Connections to A (J501) or C (J503)
- Civilian Radio Connection to C-RX (J508)
- Nokia Style headset Connection to A (J501) or C (J503)
- Kenwood HT Connections to A (J501) or C (J503)
- Example of My integration
These are some photos of my integration of the VIC1 with civilian radios, i used the circuit defined in File:Vic1-tx-rx-to-civilian radio.gif