Difference between revisions of "GN-32"

From RadioNerds
Jump to navigation Jump to search
(Created page with "* part of SCR-132 The Power Equipment, GN-32, is a motor-generator set consisting of the following machines mounted on a single base: 1. A 2000-volt direct current genera...")
 
Line 3: Line 3:
 
The Power Equipment, GN-32, is a motor-generator set consisting of the
 
The Power Equipment, GN-32, is a motor-generator set consisting of the
 
following machines mounted on a single base:
 
following machines mounted on a single base:
1. A 2000-volt direct current generator.
+
* 1. A 2000-volt direct current generator.
2. A nO-volt direct current generator.
+
* 2. A nO-volt direct current generator.
S. A l2-volt direct current generator.
+
* 3. A l2-volt direct current generator.
4. A nO-volt or 220-volt alternating current single-phase induction motor.
+
* 4. A nO-volt or 220-volt alternating current single-phase induction motor.
 
The two low-voltage generators and the motor have a common shaft and a
 
The two low-voltage generators and the motor have a common shaft and a
 
common housing. The high-voltage generator is direct-coupled to the motor shaft.
 
common housing. The high-voltage generator is direct-coupled to the motor shaft.

Revision as of 01:13, 14 December 2013

The Power Equipment, GN-32, is a motor-generator set consisting of the following machines mounted on a single base:

  • 1. A 2000-volt direct current generator.
  • 2. A nO-volt direct current generator.
  • 3. A l2-volt direct current generator.
  • 4. A nO-volt or 220-volt alternating current single-phase induction motor.

The two low-voltage generators and the motor have a common shaft and a common housing. The high-voltage generator is direct-coupled to the motor shaft. The 2000<-voltgenerator is provided with two lOOO-volt commutators to provide 1000<-voltcurrent for the VT-4 tubes. The single-phase induction motor is provided with a split-phase winding for starting. This winding is short-circuited when the motor attains proper speed. The motor is constructed to operate on either nO-volt or 220-volt single-phase alternating current. The power equipment may be operated on nO-volt direct current by utilizing the nO-volt direct current generator as a motor.