FT - Fittings
Jump to navigation
Jump to search
FT / fittings list
- FT-1 Fitting, wooden key battens and sliding shelf. for keys, set box, and battery for SCR-65 in JN jenny
- FT-2 coupler for mast sections
- FT-3 Pin for insulator IN-6
- FT-4 Mounting, generator, 2 wooden blocks and steel screws 6-7/8 X 9-1/2 inches, for curtis JN aeroplane.
- FT-5 Adapter, american vacuume tubes to French equipment
- FT-6 Bracket, mounting, for BC-11, or BC-12
- FT-7 Mounting, generator, aluminum casting for JN-4-D, JN-4-D jenny
- FT-8 Mounting, generator, aluminum casting for JN-4
- FT-9 Fastener, cast iron tent slide for guy rope
- FT-10 fixture portable desk lamp, and clamp, for use in 6-ton tank.
- FT-11 Band, anchor for BC-39 to shelf in 6-ton tank
- FT-12 Clamp, for holding mast in verticle position on 6-ton tank
- FT-13 Holder, for compass I-14, lower end of mast loop LP-1
- FT-14 Clamp, for MS-13
- FT-15 Adapter French vacuume tubes to American equipment
- FT-16 Frame, metal for mounting SCR-84 in airplane
- FT-17 Mounting, for condenser, P/O SCR-73
- FT-18 Mounting, generator, sheet metal, JN-4-H jenny
- FT-19 Mounting, sheet metal frame for mounting grid leak resistance and condenser
- FT-20 Mounting, sheet metal frame for inked cardboard resistor.
- FT-21 turnbuckle, bronze 8-inches
- FT-22 Mounting, for condensers
- FT-23
- FT-24 Clip, for U-bolt, for wire rope.
- FT-25 Pin wooden, for TN-1 tent, P/O SCR-49
- FT-26
- FT-27
- FT-28
- FT-29
- FT-30
- FT-31
- FT-32
- FT-33
- FT-34
- FT-35
- FT-36
- FT-37
- FT-38
- FT-39
- FT-40
- FT-41
- FT-42
- FT-43
- FT-44
- FT-45 sleeving, lead, for covering splice in lead covered cable. (various sizes)
- FT-46 sleeving, lead, for covering splice in lead covered cable.
- FT-47 sleeving, lead, for covering splice in lead covered cable.
- FT-48 sleeving, lead, for covering splice in lead covered cable.
- FT-49 Stud, brass knob threaded for TM-32 terminal.
- FT-50 Clamp, for mounting I-22 to BC-47
- FT-51
- FT-52
- FT-53 Adapter, wood used with FT-54 TN-1 (tent) P/O SCR-49
- FT-54 Adapter, wood used with TN-1 (tent) P/O SCR-49
- FT-55 Adapter, 31 inch spruce, X 2-1/2 Dia. for MS-2, TN-1 (tent) P/O SCR-49
- FT-56
- FT-57 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism
- FT-58 Bracket, iron skeleton for gong M-57 or M-59, and bell mechanism ect.
- FT-59 Mounting, buzzer used in target range signaling system
- FT-60 Spreader, antenna, 33-Feet 6-inchs long
- FT-61 Bracket, iron triangle for teleautograph.
- FT-62 Hanger for teleautograph.
- FT-63 Sleeve, splicing iron for armored cable
- FT-64 Mounting, generator, steel SCR-73 to strut of De Haviland plane.
- FT-65 Adapter, for VT-5 tube, SO-2 socket
- FT-66
- FT-67
- FT-68
- FT-69
- FT-70
- FT-71
- FT-72
- FT-73
- FT-74 ring, counterpoise
- FT-75
- FT-76
- FT-77
- FT-78
- FT-79
- FT-80
- FT-81
- FT-82
- FT-83
- FT-84
- FT-85
- FT-86
- FT-87
- FT-88
- FT-89
- FT-90
- FT-91
- FT-92
- FT-93
- FT-94
- FT-95
- FT-96
- FT-97
- FT-98
- FT-99 mounting, P/O SCR-283
- FT-100 mounting, P/O SCR-283
- FT-101
- FT-102
- FT-103
- FT-104
- FT-105
- Ft-106
- FT-107 mount for BD-77 dynamotor
- Ft-108
- FT-109
- FT-110
- FT-111
- FT-112
- FT-113
- FT-114
- FT-115 mounting, BC-375
- FT-116
- FT-117
- FT-118 mounting, P/O SCR-283
- FT-119
- FT-120
- FT-121
- FT-122
- FT-123
- FT-124
- FT-125
- FT-126
- FT-127
- FT-128
- FT-129
- FT-130
- FT-131
- FT-132
- FT-133
- FT-134
- FT-135
- FT-136
- FT-137
- FT-138
- FT-139
- FT-140
- FT-141 mounting, P/O SCR-283
- FT-142 for BC-306
- FT-143
- FT-144
- FT-145
- FT-146
- FT-147
- FT-148
- FT-149
- FT-150
- FT-151 mounting for BC-191, SCR-193
- FT-152
- FT-153
- FT-154 mount for BC-348, AN~ARR-11
- FT-155
- FT-156 P/O SCR-238
- FT-157 P/O SCR-238
- FT-158
- FT-159
- FT-160
- FT-161 mount for BC-1023
- FT-162 mounting for BC-312
- FT-163
- FT-164 crystal holder
- FT-165
- FT-166
- FT-167 P/O SCR-238
- FT-168
- FT-169
- FT-170
- FT-171 crystal holder
- FT-172 snuber for BC-191, SCR-193
- FT-173 mounting for BC-223
- FT-174
- FT-175
- FT-176
- FT-177
- FT-178 snuber for BC-312, SCR-193
- FT-179
- FT-180
- FT-185 mounting for PE-55 dynamotor
- FT-186
- FT-190 RC-25
- FT-191 RC-25
- FT-192 RC-25
- FT-193
- FT-200
- FT-208 P/O SE-8
- FT-209
- FT-210
- FT-220- A TRIPLE RACK MOUNT AN~ARC-5 RECEIVERS AND TRANSMITTERS
- FT-225
- FT-226 double mounting for BC-457
- FT-230
- FT-237 mounting for SCR-508, SCR-608
- FT-238
- FT-239 mount for SCR-293, SCR-294
- FT-240 P/O AN~ARC-3
- FT-241 crystal holder
- FT-242
- FT-243 crystal holder
- FT-244 rack for AN~VRC-1 universal ?
- FT-244-A rack AN~ARC-10
- FT-245
- FT-246
- FT-247
- FT-248
- FT-249
- FT-250 shock mount for SCR-510, SCR-610.
- FT-251 P/O SCR-240
- FT-252
- FT-253 mounting for SCR-506
- FT-254
- FT-255
- FT-260
- FT-263 P/O SCR-241
- FT-265
- FT-268 P/O BC-704
- FT-269
- FT-270
- FT-280
- FT-284 stand for CH-74, or adapter plate
- FT-285 low stand for CH-74
- FT-286
- FT-295 mount for SCR-585
- FT-300
- FT-310 adapter BC-946
- FT-317 mounting for plate supply unit PE-117, PE-120
- FT-318 mounting for BC-908
- FT-328 mounting for BC-918
- FT-329
- FT-330
- FT-340
- FT-345 Mount (receiver) BC-603, AN~VRC-5
- FT-350
- FT-384 adapter, test SCR-508 / SCR-608
- FT-400
- FT-419 bracket, leg for FT-250
- FT-420 bracket, leg for FT-250
- FT-421
- FT-422 bracket (brush guard) MP-50
- FT-423
- FT-424
- FT-425
- FT-429 renforcing plate for MP-50 mast bracket
- FT-430
- FT-449 bracket, for LS-3?
- FT-450 bracket legs for FT-250 used in Dodge WC pickup
- FT-460
- FT-470
- FT-475 P/O SCR-193
- FT-476
- FT-477 P/O SCR-193
- FT-480
- FT-482 mounting for SCR-694
- FT-486 P/O RC-36
- FT-488 Mount P/O SCR-624
- FT-499 bracket, legs for FT-250
- FT-500
- FT-501 adapter Battery, SCR-536
- FT-502
- FT-506 mounting for SCR-619
- FT-507
- FT-508 Mount (transmitter) AN~VRC-5