Difference between revisions of "EF Johnson Challenger Series Information"

From RadioNerds
Jump to navigation Jump to search
 
Line 262: Line 262:
  
  
[[Category:Military/EF Johnson]]
+
[[Category:EF Johnson]]

Latest revision as of 18:32, 22 May 2013

EF Johnson Series Radio Information

these are very versatile radios, they will easily move into the ham bands VHF and UHF models. The logic boards can be swapped between models and reprogrammed so that you can make a 2 Channel VHF a 99 channel by just replacing the logic board and reprogramming. The boards between UHF and VHF are fully interchangeable. I have also converted non-remote models to remote and vice versa. Converting Dash Mount EF Johnson Challenger Radios to Remote Mount


Model Number Decoding

Challenger series radios have the following part numbers. They are in the form:

242-MMMM-TBA
242 = For the Challenger Series line
MMMM = Model Number (see below)
T = Radio Type
B = Frequency Band
A = Accessories / Programming


Models

The VHF units were 715x and 716x (the 5x were 1st generation and 6x were 2nd generation)

The UHF units were 717x and 718x (the 7x were 1st generation and 8x were 2nd generation)

The following numbers replace the x as mentioned above:

71x1
2 Channel
25 watts (VHF)
15 watts (UHF)
71x2
8 Channel
25 watts (VHF)
15 watts (UHF)
71x3
2 Channel
40 watts (VHF)
35 watts (UHF)
71x4
8 Channel
40 watts (VHF)
35 watts (UHF)
71x5
20 Channel
40 watts (VHF)
35 watts (UHF)
71x6
99 Channel
40 watts (VHF)
35 watts (UHF)
71x7
99 Channel
100 watts (VHF)
80 watts (UHF)

If it had a -5 after the number it was a remote mount system


7151
Band: VHF
Channels: 2 Channel
Output: 25 Watts


7152
Band: VHF
Channels: 8 Channel
Output: 25 Watts


7153
Band: VHF
Channels: 2 Channel
Output: 40 Watts


7154
Band: VHF
Channels: 8 Channel
Output: 40 Watts


7155
Band: VHF
Channels: 20 Channel
Output: 40 Watts


7156
Band: VHF
Channels: 99 Channel
Output: 40 Watts


7157
Band: VHF
Channels: 99 Channel
Output: 100 Watts


7161
Band: VHF
Channels: 2 Channel
Output: 25 Watts


7162
Band: VHF
Channels: 8 Channel
Output: 25 Watts


7163
Band: VHF
Channels: 2 Channel
Output: 40 Watts


7164
Band: VHF
Channels: 8 Channel
Output: 40 Watts


7165
Band: VHF
Channels: 20 Channel
Output: 40 Watts


7166
Band: VHF
Channels: 99 Channel
Output: 40 Watts


7167
Band: VHF
Channels: 99 Channel
Output: 100 Watts


7171
Band: UHF
Channels: 2 Channel
Output: 15 Watts


7172
Band: UHF
Channels: 8 Channel
Output: 15 Watts


7173
Band: UHF
Channels: 2 Channel
Output: 35 Watts


7174
Band: UHF
Channels: 8 Channel
Output: 35 Watts


7175
Band: UHF
Channels: 20 Channel
Output: 35 Watts


7176
Band: UHF
Channels: 99 Channel
Output: 35 Watts


7177
Band: UHF
Channels: 99 Channel
Output: 80 Watts


7181
Band: UHF
Channels: 2 Channel
Output: 15 Watts


7182
Band: UHF
Channels: 8 Channel
Output: 15 Watts


7183
Band: UHF
Channels: 2 Channel
Output: 35 Watts


7184
Band: UHF
Channels: 8 Channel
Output: 35 Watts


7185
Band: UHF
Channels: 20 Channel
Output: 35 Watts


7186
Band: UHF
Channels: 99 Channel
Output: 35 Watts


7187
Band: UHF
Channels: 99 Channel
Output: 80 Watts

Radio Type

0 = Standard Front Mount
1 = Standard Remote Mount

Frequency Band

1 = 403 - 430 mHz
2 = 450 - 488 mHz
3 = 488 - 512 mHz

Accessories / Programming

0-9 = Additional accessories

Radio Identification by Images

you can easily identify the band of the radio by looking at the inside. the UHF has two small cover plates the the VHF has on large one.


Power output of the radio can be determined by the size of the rear heatsink. the max power is also determined by the band (UHF/VHF)


Determining the number of Channels

(I'm missing an 8 channel image, but its easy, it only has one digit)