Converting Dash Mount EF Johnson Challenger Radios to Remote Mount

From RadioNerds
Revision as of 19:24, 10 December 2012 by RadioNerds (talk | contribs)
Jump to navigation Jump to search

the Ef johnson Challenger series radios are quite flexible for older technology. You can take a dash mount radio and convert it to remote mount if you have the remote head and junction box.

These are connected to the junction box via a n 8 pin modular connector, that resembles an RJ45, but its just a little smaller. You can easily file down the sides of an RJ45 and make it fit perfectly.

  • Connections
    • 1 - (A) Orange - Receive Data
    • 2 - (1) Ground Braid
    • 3 - (2) Red - Mic audio
    • 4 - (3) Green - Power Control
    • 5 - (4) Yellow - PTT
    • 6 - (5) Blue - 13.4 volt source
    • 7 - (6) White - Receive Audio
    • 8 - (B) Brown - Transmit Data

Challenger Remote Components

although the image is clearly of an 86xx series, the remote heads are the same Challenger remote hookup.jpg

Choosing the Proper Radio

Challenger ok to convert.jpg

Challenger not ok to convert.jpg

Challenger remote programming hookup diagram.jpg

Challenger remote junction box schematic.jpg

Challenger remote hookup-close1.jpg

Challenger remote hookup-close2.jpg

Challenger remote hookup-close3.jpg