Difference between revisions of "AN~VIC-1"

From RadioNerds
Jump to navigation Jump to search
 
(25 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Description==
 
==Description==
The AN/VIC-1 Intercommunication Set provides voice communication between two to five vehicle crew members. It is used in those vehicles that do not have an intercommunication system as a part of a radio set. It consists of two major components: a Control Intercommunication Set [[C-2298/VRC]] is installed for each crew member who is to use the radio equipment (in a tank it is installed at each crew position except the drivers'), and an Amplifier, Audio Frequency, [[AM-1780/VRC]], which amplifies the voice signals and controls their distribution throughout the system. Installation kits provided for specific vehicles may include other control boxes and audio accessories that are used in conjunction with the AN/VIC-1 Intercommunication Set. In addition, cable assembly, special purpose electrical [[CX-4720/VRC]] is used to connect the vehicular power supply to the amplifier and one [[CX-4723/VRC]] is used to connect the amplifier to each control box. While typically the AN/VIC-1 is used in vehicles, it may be used for non-vehicular installations when the correct DC power source is available. It has two line binding posts that may be used to connect a remotely located telephone or switchboard into the vehicular intercommunication system.
+
The AN/VIC-1 Intercommunication Set provides voice communication between two to five vehicle crew members. It is used in those vehicles that do not have an intercommunication system as a part of a radio set. It consists of two major components: a Control Intercommunication Set [[C-2298/VRC]] is installed for each crew member who is to use the radio equipment (in a tank it is installed at each crew position except the drivers'), and an Amplifier, Audio Frequency, [[AM-1780~VRC|AM-1780/VRC]], which amplifies the voice signals and controls their distribution throughout the system. Installation kits provided for specific vehicles may include other control boxes and audio accessories that are used in conjunction with the AN/VIC-1 Intercommunication Set. In addition, cable assembly, special purpose electrical [[CX-4720~VRC|CX-4720/VRC]] is used to connect the vehicular power supply to the amplifier and one [[CX-4723~VRC|CX-4723/VRC]] is used to connect the amplifier to each control box. While typically the [[AN/VIC-1]] is used in vehicles, it may be used for non-vehicular installations when the correct DC power source is available. It has two line binding posts that may be used to connect a remotely located telephone or switchboard into the vehicular intercommunication system.
The [[AM-1780/VRC]] Audio Amplifier is the main function box for the Intercommunication System. It has controls for both power and also amplification. The [[AM-1780/VRC]] provides connections between the amplifier and the crew members' audio accessories. It has a volume control and a radio/intercommunication selector switch. This unit amplifies intercom as well as received audio signals. It also functions as a main control box and an interconnection junction. As a control box it distributes power for intercom and radio operation, permits transmission by the commander or crew, and accentuates intercom audio to override the received signal. As a junction box, it interconnects the radio set and intercom system.
+
The [[AM-1780~VRC|AM-1780/VRC]] Audio Amplifier is the main function box for the Intercommunication System. It has controls for both power and also amplification. The [[AM-1780~VRC|AM-1780/VRC]] provides connections between the amplifier and the crew members' audio accessories. It has a volume control and a radio/intercommunication selector switch. This unit amplifies intercom as well as received audio signals. It also functions as a main control box and an interconnection junction. As a control box it distributes power for intercom and radio operation, permits transmission by the commander or crew, and accentuates intercom audio to override the received signal. As a junction box, it interconnects the radio set and intercom system.
  
 +
==Additional Accessory Usage==
 +
The VIC-1 can allow a number of additional accessories to be used, these include microphones [[H-250/GR]] or [[H-189/GR]], speakers [[LS-454/U]], plain headsets like the [[H-140A~U|H-140A/U]] or [[H-161A~U|H-161A/U]].
 +
 +
[[File:AN-VIC-1_Accessories.gif]]
 +
 +
==Related Files==
 +
;{{pdf|TM_11-5830-340-12.pdf|TM 11-5830-340-12}}
 +
:OPERATOR'S AND ORGANIZATIONAL MAINTENANCE MANUAL
 +
::INTERCOMMUNICATION SET AN/VIC-1(V) (NSN 5830-00-856-3273)
 +
:CONTROL, INTERCOMMUNICATION SETS
 +
::C-10456/VRC (NSN 5830-01-082-0804)
 +
::C-10680/VRC
 +
:AMPLIFIER, AUDIO FREQUENCY
 +
::AM-7046/VRC
 +
::15 January 1986
 +
 +
 +
;{{pdf|TM 11-5830-340-23P.PDF|TM 11-5830-340-23P}}
 +
:ORGANIZATIONAL AND DIRECT SUPPORT
 +
::MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
 +
::INTERCOMMUNICATIONS SET
 +
::AN/VIC-1(V) (NSN 5830-00-856-3273)
 +
::1 NOVEMBER 1988
 +
 +
 +
;{{pdf|TM_11-5830-340-30.pdf|TM 11-5830-340-30}}
 +
:Direct Support Maintenance
 +
::INTERCOMMUNICATION SET AN/VIC-1(V) (NSN 5830-00-856-3273)
 +
::15 September 1986
 +
 +
 +
===AM-1780B===
 +
;{{pdf|TM_11-5895-1548-24P.PDF|TM 11-5895-1548-24P}}
 +
:UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
 +
::REPAIR PARTS AND SPECIAL TOOLS LIST
 +
::AMPLIFIER, AUDIO FREQUENCY
 +
::AM-1780B/VRC (NSN 5895-01-284-3057)
 +
::1 NOVEMBER 1997
 +
 +
 +
;{{pdf|TM 11-5895-1548-34.PDF|TM 11-5895-1548-34}}
 +
:DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
 +
::AUDIO FREQUENCY AMPLIFIER
 +
::AM-1780B/VRC (NSN 5895-01-284-3057)
 +
::1 MAY 1995
  
The [[C-2298/VRC]] Intercommunication Control Set provides radio and intercom facilities for the commander or other personnel in the vehicle. A selector allows reception and transmission on any or all receiver-transmitters in the system. A volume control adjusts the audio level of intercom and received signals.
 
  
  
 
[[Category:Military/Intercoms]]
 
[[Category:Military/Intercoms]]
 +
{{DISPLAYTITLE:AN/VIC-1}}

Latest revision as of 03:16, 27 February 2015

Description

The AN/VIC-1 Intercommunication Set provides voice communication between two to five vehicle crew members. It is used in those vehicles that do not have an intercommunication system as a part of a radio set. It consists of two major components: a Control Intercommunication Set C-2298/VRC is installed for each crew member who is to use the radio equipment (in a tank it is installed at each crew position except the drivers'), and an Amplifier, Audio Frequency, AM-1780/VRC, which amplifies the voice signals and controls their distribution throughout the system. Installation kits provided for specific vehicles may include other control boxes and audio accessories that are used in conjunction with the AN/VIC-1 Intercommunication Set. In addition, cable assembly, special purpose electrical CX-4720/VRC is used to connect the vehicular power supply to the amplifier and one CX-4723/VRC is used to connect the amplifier to each control box. While typically the AN/VIC-1 is used in vehicles, it may be used for non-vehicular installations when the correct DC power source is available. It has two line binding posts that may be used to connect a remotely located telephone or switchboard into the vehicular intercommunication system. The AM-1780/VRC Audio Amplifier is the main function box for the Intercommunication System. It has controls for both power and also amplification. The AM-1780/VRC provides connections between the amplifier and the crew members' audio accessories. It has a volume control and a radio/intercommunication selector switch. This unit amplifies intercom as well as received audio signals. It also functions as a main control box and an interconnection junction. As a control box it distributes power for intercom and radio operation, permits transmission by the commander or crew, and accentuates intercom audio to override the received signal. As a junction box, it interconnects the radio set and intercom system.

Additional Accessory Usage

The VIC-1 can allow a number of additional accessories to be used, these include microphones H-250/GR or H-189/GR, speakers LS-454/U, plain headsets like the H-140A/U or H-161A/U.

AN-VIC-1 Accessories.gif

Related Files

Adobe PDF icon.png TM 11-5830-340-12

OPERATOR'S AND ORGANIZATIONAL MAINTENANCE MANUAL
INTERCOMMUNICATION SET AN/VIC-1(V) (NSN 5830-00-856-3273)
CONTROL, INTERCOMMUNICATION SETS
C-10456/VRC (NSN 5830-01-082-0804)
C-10680/VRC
AMPLIFIER, AUDIO FREQUENCY
AM-7046/VRC
15 January 1986


Adobe PDF icon.png TM 11-5830-340-23P

ORGANIZATIONAL AND DIRECT SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
INTERCOMMUNICATIONS SET
AN/VIC-1(V) (NSN 5830-00-856-3273)
1 NOVEMBER 1988


Adobe PDF icon.png TM 11-5830-340-30

Direct Support Maintenance
INTERCOMMUNICATION SET AN/VIC-1(V) (NSN 5830-00-856-3273)
15 September 1986


AM-1780B

Adobe PDF icon.png TM 11-5895-1548-24P

UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
AMPLIFIER, AUDIO FREQUENCY
AM-1780B/VRC (NSN 5895-01-284-3057)
1 NOVEMBER 1997


Adobe PDF icon.png TM 11-5895-1548-34

DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
AUDIO FREQUENCY AMPLIFIER
AM-1780B/VRC (NSN 5895-01-284-3057)
1 MAY 1995