Difference between revisions of "AB-1386~U"

From RadioNerds
Jump to navigation Jump to search
 
(9 intermediate revisions by the same user not shown)
Line 12: Line 12:
  
 
Two mounting kits may be used to adapt the HMMWV and the tracked vehicle with brackets and hardware to deploy the mast. The mounting kits are used to anchor the mast to the vehicle and to stabilize the mast when deploying it under normal conditions (i.e., winds below 25 mph [40 kph]).
 
Two mounting kits may be used to adapt the HMMWV and the tracked vehicle with brackets and hardware to deploy the mast. The mounting kits are used to anchor the mast to the vehicle and to stabilize the mast when deploying it under normal conditions (i.e., winds below 25 mph [40 kph]).
 
 
 
 
  
  
Line 30: Line 26:
 
# Can be deployed on maximum  10-degree (17.6 percent) slope.
 
# Can be deployed on maximum  10-degree (17.6 percent) slope.
 
# Can be deployed in winds up to 25 mph (40 kph).  Directional pointing accuracy is maintained  in winds up to 60 mph (96 kph).  Maximum survival wind speed is 80 mph (128 kph).
 
# Can be deployed in winds up to 25 mph (40 kph).  Directional pointing accuracy is maintained  in winds up to 60 mph (96 kph).  Maximum survival wind speed is 80 mph (128 kph).
 +
  
 
===Equipment Data===
 
===Equipment Data===
Temperature Ranges:
+
;Temperature Ranges:
 
:Operating
 
:Operating
 
::-40 °F to 125 °F (-40 °C to 52°C)
 
::-40 °F to 125 °F (-40 °C to 52°C)
Line 53: Line 50:
 
::19 ft (5.8 m)
 
::19 ft (5.8 m)
  
Weights:
+
;Weights:
 
:Mast
 
:Mast
 
::42 lbs. (19.1 kg) unpacked
 
::42 lbs. (19.1 kg) unpacked
Line 63: Line 60:
  
 
[[File:ab-1386-1.png|200px]] [[File:ab-1386-gearbox.png|200px]] [[File:ab-1386-gearbox-2.png|200px]]
 
[[File:ab-1386-1.png|200px]] [[File:ab-1386-gearbox.png|200px]] [[File:ab-1386-gearbox-2.png|200px]]
 +
 +
  
 
==Common problems==
 
==Common problems==
 
  
  
Line 103: Line 101:
  
 
[[File:AB1386_GEARBOX_1280.JPG|thumb|right|Pressing new bearing onto the aluminum backing]]
 
[[File:AB1386_GEARBOX_1280.JPG|thumb|right|Pressing new bearing onto the aluminum backing]]
 +
  
 
===Crank turns, but won't raise or lower the tower===
 
===Crank turns, but won't raise or lower the tower===
Line 121: Line 120:
  
 
[[File:AB1386_GEARBOX_1271.JPG|thumb|right|Arrows pointing to new welds]]
 
[[File:AB1386_GEARBOX_1271.JPG|thumb|right|Arrows pointing to new welds]]
 +
  
 
==Other Images==
 
==Other Images==
Line 143: Line 143:
 
===My Truck Pictures===
 
===My Truck Pictures===
 
<gallery widths=100px heights=100px perrow=5>
 
<gallery widths=100px heights=100px perrow=5>
File:M37_AB1386_13.JPG|Spotted this is a junk pile!
+
File:M37_AB1386_13.JPG|Spotted this in a junk pile!
 
File:M37_AB1386_1.JPG|Fully deployed mast
 
File:M37_AB1386_1.JPG|Fully deployed mast
 
File:M37_AB1386_2.JPG|Base in the bed pocket, with mast without gearbox
 
File:M37_AB1386_2.JPG|Base in the bed pocket, with mast without gearbox
Line 159: Line 159:
  
  
 
+
==Reference Files==
==Additional Files==
 
 
;{{pdf|TM 11-5985-426-12-P.pdf|TM 11-5985-426-12&P}}
 
;{{pdf|TM 11-5985-426-12-P.pdf|TM 11-5985-426-12&P}}
 
:OPERATOR'S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST EQUIPMENT DATA
 
:OPERATOR'S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST EQUIPMENT DATA
 
::MAST AB-1386/U (NSN 5985-01-381-6341) (EIC:N/A)
 
::MAST AB-1386/U (NSN 5985-01-381-6341) (EIC:N/A)
 
::OPERATOR PMCS WITH ELECTRICAL EQUIPMENT MOUNTING MT-6967/G (NSN MT-6968/G (NSN 5975-01-390-9612) (EIC: N/A)
 
::OPERATOR PMCS WITH ELECTRICAL EQUIPMENT MOUNTING MT-6967/G (NSN MT-6968/G (NSN 5975-01-390-9612) (EIC: N/A)
 +
::1 JULY 1996
 +
 +
 +
 +
;{{pdf|TB 11-5985-426-20.PDF|TB 11-5985-426-20}}
 +
:INSTALLATION INSTRUCTIONS FOR
 +
:MAST AB-1386/U (NSN 5985-01-381-6341) (EIC: N/A)
 +
::Utility Truck: Cargo/Troop Carrier, 1-1/4 Ton, 4x4, M998
 +
::Utility Truck: Cargo/Troop Carrier, 1-1/4 Ton, 4x4, w/Winch, M1038 Utility Truck: Heavy Variant, 4x4, M1097
 +
::Utility Truck: S250 Shelter Carrier, 4x4, M1037
 +
::Utility Truck: S250 Shelter Carrier, 4x4, w/Winch, M1042
 +
::Armored Full-Tracked Personnel Carrier M113A2
 +
::Light Tracked Command Post Carrier M577A2
 +
::1 JULY 1996
 +
 +
  
 +
;{{pdf|Will-Burt_QEAM_Catalog.pdf|Will-Burt QEAM Catalog}}
  
 
[[Category:Military/Masts]]
 
[[Category:Military/Masts]]
 +
{{DISPLAYTITLE:AB-1386/U}}

Latest revision as of 03:03, 5 March 2015

Description

Ab-1386-2.png

Quick Erect Antenna Mast System (QEAM) [AB-1386/U]

The QEAM is a mobile quick erect antenna mast used for elevating tactical communications antennas to a maximum height of 33 ft (10M) which results in more reliable communications over extended ranges.

The QEAM replaces the OE-254, which is vastly more difficult to raise and lower due to its large volume of mast sections and other parts which are easily lost.

The QEAM mast can mount antenna receivers (feed cones, etc) such as the AS-3166 (P/O OE-254), MP-68 (P/O RC-292), AS-4292 (P/O MSE) and A3005068 (P/O EPLRS). The mast can be deployed and operated in ground and vehicular (wheeled and tracked) mounted configurations. The mast can be erected in 7 ½ minutes with two persons and in 15 minutes with one person.

Accessories are provided to assist with guying, anchoring, and operating the mast in its ground mount configuration. They include a hammer, a tripod, guy assemblies, guy stakes, baseplate stakes, crank handle, baseplate, and a radius rope.

Two mounting kits may be used to adapt the HMMWV and the tracked vehicle with brackets and hardware to deploy the mast. The mounting kits are used to anchor the mast to the vehicle and to stabilize the mast when deploying it under normal conditions (i.e., winds below 25 mph [40 kph]).


Characteristics

  1. Manportable, manually erected, guyed mast.
  2. Resists water and other environmental elements.
  3. Mast height is variable by deploying only as much height as is required.


Capabilities and Features

  1. Supports Antenna AS-3166/GRC, Antenna Base MP-68, Antenna Element A3005068-1 with Antenna Adapter A3004947, or Antenna AS-4292/U.
  2. Permits antenna heights from 8.3 to 33.1 ft (2.5 to 10.1 m).
  3. Can be deployed or retrieved by an experienced two-member team in 7 1/2 minutes under tactical conditions, or by a single operator in 15 minutes.
  4. Can be deployed on maximum 10-degree (17.6 percent) slope.
  5. Can be deployed in winds up to 25 mph (40 kph). Directional pointing accuracy is maintained in winds up to 60 mph (96 kph). Maximum survival wind speed is 80 mph (128 kph).


Equipment Data

Temperature Ranges
Operating
-40 °F to 125 °F (-40 °C to 52°C)
Storage
-50 °F to 160°F (-46 °C to 71°C)
Mast Type
Vertical-raising, telescoping, tubular aluminum
Extended Height
33.1 ft (10.1 m)
Nested Height
8.3 ft (2.5 m)
Max. Operational Wind Speed
60 mph (97 kph)
Max. Survival Wind Speed
80 mph (128 kph)
Guy Assembly Lengths:
Top
54 ft (16.5 m)
Bottom
19 ft (5.8 m)
Weights
Mast
42 lbs. (19.1 kg) unpacked
Universal HMMWV Mount
56 lbs. (25.4 kg)
Tracked Vehicle Mount
40 lbs. (12.2 kg)


Ab-1386-1.png Ab-1386-gearbox.png Ab-1386-gearbox-2.png


Common problems

No gearbox, or inoperable gearbox

If the gearbox is missing, this tower can still be used. you simple remove the drive screw and manually extend the tower. You will need something to place between the last section to hold it up, or a pin to prevent it from collapsing. The process for removing the drive screw is detailed in the TM linked below Section 4.12.


Section will not collapse

The tower is designed so that the sections cannot collapse until the one below it is fully down, there is a small toggle inside the "lock" where the "post" unlocks the next section. If for some reason the "post" engages but does not unlock the next section, use a flat screwdriver to toggle the lock and the section will unlock.


Frozen Bearing

Gearbox with Old Bearing
Gearbox with New Bearing

Upon removal there is a large bearing, I had to replace this, as mine was frozen up.

The proper replacement bearing is a Koyo #62052RDC3. I obtained mine from the local Bartlett Bearing. I walked into the store and showed them what i needed, and they found it on the first try. amazing service!


You will need a press to do this..


New bearing with old backing and bushing
  1. Remove the bearing from the housing
  2. To remove the outer ring, lightly tap the bearing while holding the outer ring (the one with the notch)
  3. Place the bearing in the press or suitable jig, and press the brass bushing out the top from the rear.
  4. To remove the aluminum backing is more difficult. It is attached in the center of the bearing in a way that wasn't designed to be removed. You will have to cut the bearing from around it. I tried using different pullers, but the aluminum will bend and deform before the bearing can be removed. I used a Dremel to make slots in the outer race while in a vice, and carefully tap with a chisel. You should be able to disassemble the bearing piece by piece.
  5. Once this is cut off you can press the aluminum backing onto the new bearing
  6. Press the brass bushing back in the front
  7. Press the outer ring (one with the notch) back on


Pressing new bearing onto the aluminum backing


Crank turns, but won't raise or lower the tower

This is usually due to the output shaft notch no longer being tight. When the crank shaft is turned, this also turns inside the shaft and wont turn the large screw on the tower.

To test this, put a screwdriver in the output shaft and attempt to hold the shaft in place while turning the crank, if you can turn the crank, and the screwdriver doesn't turn, you have confirmed it.

I attempted to resolve this many ways,

  1. Dimpling the edge of the shaft to make the notch tight
  2. JB Weld
  3. Wedging it by taping it fron the back
  4. Welding

Welding was the only one that worked. What you dont want, which i was privileged enough to experience, is to get the tower up, then have this loosen up again and have no way to lower it.

Weld it, you don't want this problem.. trust me.

Arrows pointing to new welds


Other Images

Gear Box Images


My Truck Pictures


Reference Files

Adobe PDF icon.png TM 11-5985-426-12&P

OPERATOR'S AND UNIT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST EQUIPMENT DATA
MAST AB-1386/U (NSN 5985-01-381-6341) (EIC:N/A)
OPERATOR PMCS WITH ELECTRICAL EQUIPMENT MOUNTING MT-6967/G (NSN MT-6968/G (NSN 5975-01-390-9612) (EIC: N/A)
1 JULY 1996


Adobe PDF icon.png TB 11-5985-426-20

INSTALLATION INSTRUCTIONS FOR
MAST AB-1386/U (NSN 5985-01-381-6341) (EIC: N/A)
Utility Truck: Cargo/Troop Carrier, 1-1/4 Ton, 4x4, M998
Utility Truck: Cargo/Troop Carrier, 1-1/4 Ton, 4x4, w/Winch, M1038 Utility Truck: Heavy Variant, 4x4, M1097
Utility Truck: S250 Shelter Carrier, 4x4, M1037
Utility Truck: S250 Shelter Carrier, 4x4, w/Winch, M1042
Armored Full-Tracked Personnel Carrier M113A2
Light Tracked Command Post Carrier M577A2
1 JULY 1996


Adobe PDF icon.png Will-Burt QEAM Catalog