AN/URC-119

From RadioNerds
Jump to navigation Jump to search
Urc-119 brochure.jpg

Overview

The RT-1446/URC is a microprocessor-controlled transceiver, conservatively rated at 100 watts PEP and Average output power. The solid-state power amplifier assures continuous full-output power during keydown operation. All operating and metering functions of the transceiver are fully remote controllable over two or four wire phone lines. Additionally, the built-in phone patch and internally mounted AFK option provide communication flexibility. The unit is compatible with standard DD encryption devices, including ANDVT. The exceptionally rugged design and construction of this system guarantee continuous high performance and reliability under demanding field conditions. Automatic diagnostic BITE provides board level fault isolation for the entire system. The AN/URC-119(V) Radio Set is tuned by simply selecting a frequency (or preset channel) and keying. All other functions, including linear power amplifier and antenna tuning, are performed automatically.


Features

  • 100/500/1000 watts output power
  • 1.6 to 30 MHz
  • Microprocessor controlled
  • Digital fine tuning
  • 10 Hz synthesized steps
  • 99 field programmable channels


Dimensions
RF-350 RF-350K RF-366
Height 5.218 in. 5.218 in. 5.218 in.
Width 5.218 in. 5.218 in. 5.218 in.
Depth 5.218 in. 5.218 in. 5.218 in.
Weight 5.218 in. 5.218 in. 5.218 in.
Power Requirements
13.6 Vdc ±10%
TX 30A
RX 3A
115/230 Vac ±10%
Single Phase
50-400Hz
600Va Max
500 Watts Max
12/28 Vdc ±10%
30/15A Nominal
See RF-350K


Specifications
Operating Environment -30 to +50 Degrees C, 95% Humidity
Storage Environment -35 to +70 Degrees C, 95% Humidity
Operating Altitude 10,000 Feet
Transport Altitude 40,000 Feet
Frequency Range 1.600,00 MHz to 29.999,99 MHz
Frequency Tuning Resolution 10 Hz Increments
Tuning Continuous and Automatic
Frequency Accuracy Within 10 Hz of displayed operating frequency
Channel Memory 100-channel capacity
BFO Variable ±1 KHz, selectable in 10 Hz steps
Sensitivity
AGC Characteristics

SSB

0.5 uv for 10 dB S+N/N

AM

3.0 uv for 10 dB S+N/N


AGC CHARACTERISTICS
Attack Time SSB 30 msec. max.
Release Time Front Panel Selectable
SLOW - 3 ±1 second
MEDIUM - 200 ±1 00 milliseconds
FAST - 30 milliseconds or less
Audio Output 4 watts to internal speaker
Selectivity

SSB

Nominally 350-3050 Hz at 3 dB
Image and IF Rejection Greater than 80 dB
Overload Protection Receiver protected for input to 100 Vrms
AFSK Characteristics Center Freq / Shifts
2805 - ±42.5 Hz
2000 - ±85.0 Hz
2000 - ±425.0 Hz
Power Output

SSB

100 PEP/Average; compatible

AM

25 watt carrier nominal

CW

100 Watt PEP/Average


NOTE
The RF-350 is rated for continuous duty at 1OOW PEP. the RF-366, "key-down" transmit time should be limited When using an RF-350 in the CW or AFSK mode without to less than 20 minutes, followed by an equal receive period, to prevent automatic reduction of output power RF-350 with an attached RF-366 (as in an RF-350K) the in response to elevated temperature. When using an cooling fan provided in the RF-366 allows continuous CW or AFSK "Key-Down" Operation.

Reference Files

Adobe PDF icon.png Harris 10085-0705C

RF-350/RF-350K/RF-366
INSTRUCTION MANUAL
JULY 1989